measurements ono the plans - Wharram Builders and Friends2024-03-29T09:51:26Zhttp://wharrambuilders.ning.com/forum/topics/measurements-ono-the-plans?feed=yes&xn_auth=noHere's something based on wor…tag:wharrambuilders.ning.com,2020-01-10:2195841:Comment:1708182020-01-10T20:51:29.026ZIan Rhttp://wharrambuilders.ning.com/profile/IanR
<p>Here's something based on working (40 years) to make actual things;</p>
<p>1) Never scale off plans for manufacture, they may be ok for estimates</p>
<p>2) Never trust architects or any one else to be 100% accurate or right</p>
<p>Here's something based on working (40 years) to make actual things;</p>
<p>1) Never scale off plans for manufacture, they may be ok for estimates</p>
<p>2) Never trust architects or any one else to be 100% accurate or right</p> Note the measurments on the p…tag:wharrambuilders.ning.com,2020-01-10:2195841:Comment:1706462020-01-10T01:50:28.778ZÉric Bouvéronhttp://wharrambuilders.ning.com/profile/Bouveron
<p>Note the measurments on the plans,and report it on what you need to cut.</p>
<p>If the plan asks for a 12 inches by 4 inches plywood piece, then mesure this size on your plywood.</p>
<p>Note the measurments on the plans,and report it on what you need to cut.</p>
<p>If the plan asks for a 12 inches by 4 inches plywood piece, then mesure this size on your plywood.</p>
Throw away your rulertag:wharrambuilders.ning.com,2020-01-09:2195841:Comment:1706452020-01-09T22:22:14.771ZBudget Boaterhttp://wharrambuilders.ning.com/profile/BudgetBoater
<p></p>
<p>Throw away your ruler</p>
<p></p>
<p>Throw away your ruler</p> I dont get you!
I should rel…tag:wharrambuilders.ning.com,2020-01-09:2195841:Comment:1706422020-01-09T22:20:22.282ZVilihttp://wharrambuilders.ning.com/profile/Vili
<p>I dont get you!</p>
<p>I should rel</p>
<p>y should only rely on the provided measurements and not on what my ruler shows...correct?</p>
<p>I dont get you!</p>
<p>I should rel</p>
<p>y should only rely on the provided measurements and not on what my ruler shows...correct?</p> Unless if on the sheet plan i…tag:wharrambuilders.ning.com,2020-01-09:2195841:Comment:1708932020-01-09T21:51:37.507ZÉric Bouvéronhttp://wharrambuilders.ning.com/profile/Bouveron
<p>Unless if on the sheet plan it is given as a size design (mast foot was an exemple) rely only on measurements. Also, I suggest that you take a good care with the two indications:one is metric, the other imperial. You may use either, but don't take one for the other.</p>
<p>Unless if on the sheet plan it is given as a size design (mast foot was an exemple) rely only on measurements. Also, I suggest that you take a good care with the two indications:one is metric, the other imperial. You may use either, but don't take one for the other.</p> Do not measure the plans and…tag:wharrambuilders.ning.com,2020-01-09:2195841:Comment:1706392020-01-09T15:38:18.159ZBudget Boaterhttp://wharrambuilders.ning.com/profile/BudgetBoater
<p>Do not measure the plans and expect accuracy. Follow only the written numbers provided.</p>
<p>Do not measure the plans and expect accuracy. Follow only the written numbers provided.</p>