Is this the correct way to tie lashings Tiki26. - Wharram Builders and Friends2024-03-28T21:36:08Zhttp://wharrambuilders.ning.com/forum/topics/is-this-the-correct-way-to-tie-lashings-tiki26?commentId=2195841%3AComment%3A146653&feed=yes&xn_auth=noI've just cut 25mm conduit to…tag:wharrambuilders.ning.com,2016-11-25:2195841:Comment:1466532016-11-25T11:41:58.126ZLee Dilkeshttp://wharrambuilders.ning.com/profile/LeeDilkes
<p>I've just cut 25mm conduit to put under the lashings where they cross the radius of the beam edges.</p>
<p>I've just cut 25mm conduit to put under the lashings where they cross the radius of the beam edges.</p> tag:wharrambuilders.ning.com,2016-11-22:2195841:Comment:1467242016-11-22T15:27:21.610Zpaul andersonhttp://wharrambuilders.ning.com/profile/paulanderson
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1930104770?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1930104770?profile=RESIZE_1024x1024" class="align-full" width="721"/></a></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1930104770?profile=original" target="_self"><img width="721" src="http://storage.ning.com/topology/rest/1.0/file/get/1930104770?profile=RESIZE_1024x1024" class="align-full" width="721"/></a></p> KC and Troy built hardwood pa…tag:wharrambuilders.ning.com,2016-11-14:2195841:Comment:1466112016-11-14T13:49:06.056ZBrad Ingramhttp://wharrambuilders.ning.com/profile/BradIngram
<p>KC and Troy built hardwood pads for on top of the beams with a groove in the middle where the line goes over. That would be much easier than messing with the beams!</p>
<p>KC and Troy built hardwood pads for on top of the beams with a groove in the middle where the line goes over. That would be much easier than messing with the beams!</p> Thanks Brad and Garry . It is…tag:wharrambuilders.ning.com,2016-11-14:2195841:Comment:1464562016-11-14T06:23:29.743Zpatrick lennonhttp://wharrambuilders.ning.com/profile/patricklennon
Thanks Brad and Garry . It is a bit of work to resend and re coat the beams perhaps I could put leather or rubber under the lashings to increase the radius and stop friction. Cheers
Thanks Brad and Garry . It is a bit of work to resend and re coat the beams perhaps I could put leather or rubber under the lashings to increase the radius and stop friction. Cheers I do the same method on my Ti…tag:wharrambuilders.ning.com,2016-11-14:2195841:Comment:1463812016-11-14T03:59:01.554ZBrad Ingramhttp://wharrambuilders.ning.com/profile/BradIngram
<p>I do the same method on my Tiki 21 with no issues at all. I did some extra rounding off and built up with extra epoxy and silica where the lashings go around the top part of beam. I have pre-stretched super low stretch line for lashings and frap with dyneema. once I have four wraps of dyneema I tie end in a clove hitch to a screwdriver and pull the shit out of it. With this the lashings are extremely tight. If using low stretch line, lashing with the line wet makes it a little more stretchy…</p>
<p>I do the same method on my Tiki 21 with no issues at all. I did some extra rounding off and built up with extra epoxy and silica where the lashings go around the top part of beam. I have pre-stretched super low stretch line for lashings and frap with dyneema. once I have four wraps of dyneema I tie end in a clove hitch to a screwdriver and pull the shit out of it. With this the lashings are extremely tight. If using low stretch line, lashing with the line wet makes it a little more stretchy and then it tightens up well when it dries. </p> G'day Patrick. I am Gerry on…tag:wharrambuilders.ning.com,2016-11-13:2195841:Comment:1465192016-11-13T06:25:12.000ZBig tanehttp://wharrambuilders.ning.com/profile/ThorAlpha
G'day Patrick. I am Gerry on big tane. Please look at my profile as i have to do an rebuild on my tanenui 28. I do not think there would be an problem if the beams where rounded off at the eages as what i will be doing on my boat. I think you may just need to round off where the lashings go and that will minimze the whearing off the lashings. Changeing the rope to spcetra witch is a low streach and whear as well as high strength will allso help preserving the lashings longer. I would allso…
G'day Patrick. I am Gerry on big tane. Please look at my profile as i have to do an rebuild on my tanenui 28. I do not think there would be an problem if the beams where rounded off at the eages as what i will be doing on my boat. I think you may just need to round off where the lashings go and that will minimze the whearing off the lashings. Changeing the rope to spcetra witch is a low streach and whear as well as high strength will allso help preserving the lashings longer. I would allso after the loop go aroud 3 or 4 times then take the line through an figer 8, much like an spanish wind lass and thighten after each loop has passed around then tie off. I think that will work well as a freind of mine did on his tiki 21. I hope this will help you out<br />
Gerry on big tane.<br />
Toora.