Bulwark replacement and rudder conversion - Wharram Builders and Friends2024-03-29T13:29:51Zhttp://wharrambuilders.ning.com/forum/topics/bulwark-replacement-and-rudder-conversion?feed=yes&xn_auth=noPerhaps you can reuse the old…tag:wharrambuilders.ning.com,2018-05-29:2195841:Comment:1601142018-05-29T00:19:14.075ZAndréshttp://wharrambuilders.ning.com/profile/Andres
<p>Perhaps you can reuse the old holes of the screws. If you drill a wider and deeper hole in them, then you can fill them with thickened epoxy, and then you screw the new bulwarks on these holes. That is, you screw the screws in the thickened epoxy, not in the wood.</p>
<p>Perhaps you can reuse the old holes of the screws. If you drill a wider and deeper hole in them, then you can fill them with thickened epoxy, and then you screw the new bulwarks on these holes. That is, you screw the screws in the thickened epoxy, not in the wood.</p> http://tiki26element2.blogspo…tag:wharrambuilders.ning.com,2018-05-26:2195841:Comment:1600082018-05-26T12:35:23.620ZÉric Bouvéronhttp://wharrambuilders.ning.com/profile/Bouveron
<p><a href="http://tiki26element2.blogspot.hk/2007/03/rudder-lashing-holes-complete.html" target="_blank">http://tiki26element2.blogspot.hk/2007/03/rudder-lashing-holes-complete.html</a></p>
<p>Have a look there for your rudders.</p>
<p></p>
<p><a href="http://tiki26element2.blogspot.hk/2007/03/rudder-lashing-holes-complete.html" target="_blank">http://tiki26element2.blogspot.hk/2007/03/rudder-lashing-holes-complete.html</a></p>
<p>Have a look there for your rudders.</p>
<p></p>