Apology and redirection... Engine options on Tiki 21 - Wharram Builders and Friends2024-03-28T21:52:36Zhttp://wharrambuilders.ning.com/forum/topics/apology-and-redirection-engine-options-on-tiki-21?groupUrl=tiki21&commentId=2195841%3AComment%3A184725&groupId=2195841%3AGroup%3A10502&feed=yes&xn_auth=noHi,
I am also interested in…tag:wharrambuilders.ning.com,2020-10-07:2195841:Comment:1847252020-10-07T22:07:26.827ZRobin Grahamhttp://wharrambuilders.ning.com/profile/RobinGraham
<p>Hi,</p>
<p> I am also interested in repositioning my outboard to aft of the aft beam. My “to plan” decking is at the end of its life and I would like to replace it with a continuous deck from aft beam to mid beam without a hole with a klunking great lump of engine interfering with the open space. I was thinking about a sled hinged on or near the mid beam and a simple pully system to raise and lower the engine, perhaps a hinged bracket that could be unfolded into position and the pully…</p>
<p>Hi,</p>
<p> I am also interested in repositioning my outboard to aft of the aft beam. My “to plan” decking is at the end of its life and I would like to replace it with a continuous deck from aft beam to mid beam without a hole with a klunking great lump of engine interfering with the open space. I was thinking about a sled hinged on or near the mid beam and a simple pully system to raise and lower the engine, perhaps a hinged bracket that could be unfolded into position and the pully tightened onto the bracket to make the whole thing rigid against rough waves clattering the sled under the beam. </p>
<p>I would welcome any suggestions or pictures from someone who has already done it.</p>
<p>cheers,</p>
<p>Robin.</p> It would be great to see some…tag:wharrambuilders.ning.com,2020-02-16:2195841:Comment:1710672020-02-16T12:06:05.755ZRune M. Christensenhttp://wharrambuilders.ning.com/profile/RuneMChristensen
<p>It would be great to see some pictures of your setup :)</p>
<p>I would like to build some kind of dodger myself.</p>
<p>I'm not sure about the engine setup. Is your central platform built to plan?</p>
<p>To me it seems that most of the problems with water splashes in the cabin comes from when the bow hit a wave in a certain way. We seldom get water from the "engine hole" - a least not all the way to the cabins.</p>
<p>It would be great to see some pictures of your setup :)</p>
<p>I would like to build some kind of dodger myself.</p>
<p>I'm not sure about the engine setup. Is your central platform built to plan?</p>
<p>To me it seems that most of the problems with water splashes in the cabin comes from when the bow hit a wave in a certain way. We seldom get water from the "engine hole" - a least not all the way to the cabins.</p>