All Discussions Tagged '21' - Wharram Builders and Friends2024-03-28T19:50:52Zhttp://wharrambuilders.ning.com/forum/topic/listForTag?tag=21&feed=yes&xn_auth=noconsidering to sell your tiki 21 or tiki 26?tag:wharrambuilders.ning.com,2024-02-28:2195841:Topic:3021102024-02-28T01:51:37.178Ztidehttp://wharrambuilders.ning.com/profile/tide
<p>Hiyas,</p>
<p>I am looking to buy a tiki 21 or 26 in northern europe or UK.</p>
<p>Please do give me a shout in case you have a boat coming up for sale.<br/>(So long as it doesn't say i got one in this post - i am looking :) )<br/>Cheers!</p>
<p>Hiyas,</p>
<p>I am looking to buy a tiki 21 or 26 in northern europe or UK.</p>
<p>Please do give me a shout in case you have a boat coming up for sale.<br/>(So long as it doesn't say i got one in this post - i am looking :) )<br/>Cheers!</p> Dolly Wheelstag:wharrambuilders.ning.com,2023-05-08:2195841:Topic:2986732023-05-08T20:34:54.761ZJerry Shttp://wharrambuilders.ning.com/profile/JerryS
<p>I built 2 hull stands that can take an axle and wheels to move my Tiki 26. They work equally as well when moving a single hull although the weight of the fully rigged boat means care and manpower is required. I have launched and recovered on a slipway using them as well but attached to a car tow hook. The V-angle is taken from the shape of the bulkhead just forward of the main hatch. They are constructed of 15mm plywood both screwed and epoxy filleted. They take a 1 inch steel axle that…</p>
<p>I built 2 hull stands that can take an axle and wheels to move my Tiki 26. They work equally as well when moving a single hull although the weight of the fully rigged boat means care and manpower is required. I have launched and recovered on a slipway using them as well but attached to a car tow hook. The V-angle is taken from the shape of the bulkhead just forward of the main hatch. They are constructed of 15mm plywood both screwed and epoxy filleted. They take a 1 inch steel axle that accepts two pneumatic wheels on either side - so eight wheels in total for the pair of stands. The bolt on the picture next to the axle hole prevenets the jubilee clips on the removable axle from spinning. The wheels are secured on the axle using R clips. For a Tiki 21 everthing could be sclaed down.</p> TIKI 21 : measurements briddle length + mast raketag:wharrambuilders.ning.com,2023-04-22:2195841:Topic:2983602023-04-22T16:57:34.597ZVincenthttp://wharrambuilders.ning.com/profile/Vincent
<p>Could a Tiki 21 owner with a standard rig measure their bridle length for me ?</p>
<p></p>
<p>(Context: I bought a '21 2nd hand, but it has a modified rigging with a furler attached to an extra beam... The plan set transferred to me by the owner appears to be incomplete -- with probably a missing measurement sheet or dimensions table...) The bridles in this modified set up are smaller than normal (at 1,30m can not join them midway), and laced on the extra beam. </p>
<p></p>
<p>I wish to…</p>
<p>Could a Tiki 21 owner with a standard rig measure their bridle length for me ?</p>
<p></p>
<p>(Context: I bought a '21 2nd hand, but it has a modified rigging with a furler attached to an extra beam... The plan set transferred to me by the owner appears to be incomplete -- with probably a missing measurement sheet or dimensions table...) The bridles in this modified set up are smaller than normal (at 1,30m can not join them midway), and laced on the extra beam. </p>
<p></p>
<p>I wish to revert to the standard rig with no furler, and restore the original geometry.</p>
<p></p>
<p>For this, the bridles length is essential, as it determines the height of the junction point with the forestay.</p>
<p></p>
<p>As extra info, I would also appreciate some expression of the original mast rake. In my current setup, the mast is almost 90 degrees upright, but from parts of the drawings I do have with the plans, it looks like the top of the mast should lean somewhere between 0.30m and 0.5m aft ? </p>
<p></p>
<p>PS: to avoid any misunderstanding: I have addressed a service request to JWD, mentioning I'm willing to pay for the service (but not ready to pay in full for the complete plans, which I assume is agreeable)... Anyway, no answer so far so I thought I'd just ask for help ;-)</p>
<p></p>
<p></p>
<p></p>
<p></p> Tiki 21 Turkey For sale £6000tag:wharrambuilders.ning.com,2022-09-17:2195841:Topic:2942822022-09-17T15:41:58.679ZGeorge Woodwardhttp://wharrambuilders.ning.com/profile/GeorgeWoodward
<p><span style="font-weight: 400;">Wharram Tiki21.UK registered.</span></p>
<p><span style="font-weight: 400;">Built around 2010????? to a high standard and owned by me since???? and used for an annual holiday of two weeks when travel allowed. Based in Fethiye Turkey , Stored covered in the garden of the builder</span></p>
<p><span style="font-weight: 400;">Rigid main and forward deck with stern trampoline and swim ladder.Baby Baby Blake marine WC and holding tank in starboard hull,…</span></p>
<p><span style="font-weight: 400;">Wharram Tiki21.UK registered.</span></p>
<p><span style="font-weight: 400;">Built around 2010????? to a high standard and owned by me since???? and used for an annual holiday of two weeks when travel allowed. Based in Fethiye Turkey , Stored covered in the garden of the builder</span></p>
<p><span style="font-weight: 400;">Rigid main and forward deck with stern trampoline and swim ladder.Baby Baby Blake marine WC and holding tank in starboard hull, refrigerator in port hull. Solar panel for fridge and Usb point . Battery. 6 HP</span> <span style="font-weight: 400;">Tohatsu</span> <span style="font-weight: 400;"> 4 stroke outboard. .Road /Yard trailer expands for assembly.(may not meet turkish regs.) Lightweight deck tent and framed tent. Standard Wharram rig.</span></p>
<p><span style="font-weight: 400;">I am in Fethiye for two weeks at the end of September/|October <a href="https://storage.ning.com/topology/rest/1.0/file/get/10814899879?profile=original" target="_blank" rel="noopener">P1000661.JPG</a></span></p> Tiki 21 for sale with trailer and mooring, southern UKtag:wharrambuilders.ning.com,2022-09-06:2195841:Topic:2942572022-09-06T11:07:13.887ZRichard Barwellhttp://wharrambuilders.ning.com/profile/RichardBarwell
<p>For sale: Tiki 21, with outboard, trailer, mooring, and winter storage space.</p>
<p><br></br>Just finishing an extensive (and expensive) rebuild, September 2020 to date, including new foredecks, new tillers, partial new rear deck, new sliding hatches in garages, new locker hatches, new central decks sheathed on top and underneath (with engine mounting built around the 6hp Tohatsu outboard, centrally mounted for balance, and to keep prop in water at all times underway,) removal of old paint and…</p>
<p>For sale: Tiki 21, with outboard, trailer, mooring, and winter storage space.</p>
<p><br/>Just finishing an extensive (and expensive) rebuild, September 2020 to date, including new foredecks, new tillers, partial new rear deck, new sliding hatches in garages, new locker hatches, new central decks sheathed on top and underneath (with engine mounting built around the 6hp Tohatsu outboard, centrally mounted for balance, and to keep prop in water at all times underway,) removal of old paint and primer, antifouling etc down to bare sheathing.</p>
<p><br/>Repainted using SML single pack polyurethane paint on the decks (plus microbeads for non slip where needed), Blakes locker paint in bilges and lockers etc, Jotun Alkyd paint on the topsides, and Seaco self ablating antifouling.</p>
<p><br/>Interior painted after fitting radiused corners to all floor hatch openings to deter stress cracks from forming in the corners (no corners, no cracks!) Upholstery fitted but requires final stitching to complete (temporarily usable as is.) Dorade vents at front and back of each cabin, inspired by the similar idea used on Pahis etc.</p>
<p><br/>The main hatches are based on Rory McDougal's hatches in the famous circumnavigating 'Cookie'; the intention was to fit spray hoods too. The garages are removeable from inside.<br/>Very low hours 6hp Tohatsu ultra long shaft outboard. External tank.</p>
<p><br/>All running rigging, hull lashings recently replaced; the halyards in the photos are not the new ones. standing rigging stainless steel. New Allplas super heavy duty trampoline, and enough to make another net for behind the rear beam, mounting points on deck for netting forward of the front beam too.</p>
<p><br/>Danforth anchor with chain and warp, various fenders and lots of spare rope etc. <br/>Sails came with the boat (Jeckels main and jib, spare jib), they are useable, but could benefit from a trip to the sailmakers to freshen them up a bit. I intended to do that, then buy a new set, and keep the existing ones as spares. Dolphin striker not fitted yet as the stainless steel wire will be replaced.</p>
<p><br/>Trailer with good bearings and tyres, and a wheeled dolly to help with loading/unloading. Also includes stub beams to mount hulls together on trailer.</p>
<p><br/>Mooring comes with the boat if you want it; a fore and aft mooring in the river Axe south of Bristol UK, comes with weighted rope and chain, buoys etc to refurbish, as that was one of the jobs still to be done. Over winter storage for the boat on its trailer is available at no extra cost if needed.<br/>Every square inch of this boat was gone through, all potential problem areas were cut out and rebuilt using SP Systems epoxy and marine ply, glasscloth sheathing, and biaxial cloth, all done indoors in a properly heated workspace, under supervision of a retired yacht surveyor. <br/>All structural work well documented with many photos, diagrams, and descriptions, which I hope to collate into a word document in the next few days.</p>
<p><br/>Basically, this is as close to an 'as new' boat and outboard as you can get without paying new prices, with a trailer, mooring, and winter storage if needed. The boat should hopefully only need the usual preventative maintenance for the next x number of years.</p>
<p><br/>The only important item left on the 'to do' list is the replacement wire for the dolphin striker. I've also not yet fitted the port jib sheet track. Eyelets for lashing the tank to the deck are also needed, position to be decided. So a few very minor jobs to do when I next can.<br/>I dread to think what the cost of building from new would be now; the rent for the premises where I did the structural work and painting, plus the electricity used, came to over £1800. I have receipts for all the materials used; I have yet to total them all up, but that will be in the thousands too.</p>
<p><br/>£4250 or nearest offer.</p> Looking for a Tiki 21 near Baja California, Mexicotag:wharrambuilders.ning.com,2020-08-04:2195841:Topic:1735262020-08-04T03:29:22.940ZManuel Vivanco Bercovichhttp://wharrambuilders.ning.com/profile/ManuelVivancoBercovich
<p>Hi folks,</p>
<p>I am willing to enter in the fleet and I am searching for a Tiki 21, learn to sail it and cruise around Baja California (Mexico), where I live. Does anyone have such a vessel for sale or know about anything around? Cheers!</p>
<p>Hi folks,</p>
<p>I am willing to enter in the fleet and I am searching for a Tiki 21, learn to sail it and cruise around Baja California (Mexico), where I live. Does anyone have such a vessel for sale or know about anything around? Cheers!</p> Wharram Cornish Hui 2018tag:wharrambuilders.ning.com,2019-02-01:2195841:Topic:1652042019-02-01T08:49:53.607ZIan Bamseyhttp://wharrambuilders.ning.com/profile/IanBamsey
<p>Some more video fun and games</p>
<p><iframe width="789" height="444" src="https://www.youtube.com/embed/aASigUAuJOY?wmode=opaque" frameborder="0" allowfullscreen=""></iframe>
</p>
<p>Some more video fun and games</p>
<p><iframe width="789" height="444" src="https://www.youtube.com/embed/aASigUAuJOY?wmode=opaque" frameborder="0" allowfullscreen=""></iframe>
</p> Auto Tiller on a TIki 21tag:wharrambuilders.ning.com,2018-06-13:2195841:Topic:1604192018-06-13T21:13:13.605ZIan Bamseyhttp://wharrambuilders.ning.com/profile/IanBamsey
<p>After a bit of work I sailed for a hour or so under the control of my auto tiller. <a href="https://tiki21gratitude.blogspot.com/2018/06/auto-tiller-prototype.html" target="_blank" rel="noopener">Here's the full story.</a></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1799499075?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/1799499075?profile=RESIZE_1024x1024" width="750" class="align-center"/></a></p>
<p></p>
<p>After a bit of work I sailed for a hour or so under the control of my auto tiller. <a href="https://tiki21gratitude.blogspot.com/2018/06/auto-tiller-prototype.html" target="_blank" rel="noopener">Here's the full story.</a></p>
<p><a href="http://storage.ning.com/topology/rest/1.0/file/get/1799499075?profile=original" target="_self"><img width="750" src="http://storage.ning.com/topology/rest/1.0/file/get/1799499075?profile=RESIZE_1024x1024" width="750" class="align-center"/></a></p>
<p></p> Tiki 21 for sale Washington, USA $2500tag:wharrambuilders.ning.com,2018-05-26:2195841:Topic:1601032018-05-26T00:56:48.887ZBurkethttp://wharrambuilders.ning.com/profile/Burket
<p></p>
<p>Email Mike @ mbogoger@gmail.com</p>
<p>Needs a litter TLC, motivated to sell at $2500</p>
<p></p>
<p>Email Mike @ mbogoger@gmail.com</p>
<p>Needs a litter TLC, motivated to sell at $2500</p> Still looking-- smaller tiki or pahi or traditional designtag:wharrambuilders.ning.com,2017-11-21:2195841:Topic:1568492017-11-21T16:29:02.538Zmichael khttp://wharrambuilders.ning.com/profile/michaelk
<p>I've had my eye out for a while-- missed out on Randall's T26 but have finally convinced the family we could pony up the cash for a small wharram. Budget is ~10-15k range for a small wharram on the East Coast US, preferably between MD and ME. I'd appreciate any leads.</p>
<p>--Sorry Randall, should have jumped on your boat when I had the chance:(</p>
<p>Thanks,</p>
<p>Michael</p>
<p>I've had my eye out for a while-- missed out on Randall's T26 but have finally convinced the family we could pony up the cash for a small wharram. Budget is ~10-15k range for a small wharram on the East Coast US, preferably between MD and ME. I'd appreciate any leads.</p>
<p>--Sorry Randall, should have jumped on your boat when I had the chance:(</p>
<p>Thanks,</p>
<p>Michael</p>