Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

Christian Linder's Discussions (21)

Discussions Replied To (14) Replies Latest Activity

"Hi Roger!  I considered that option also but... From what I have seen, it is not eas…"

Christian Linder replied Jul 7, 2017 to Polythene grams/metre squared

7 Jul 7, 2017
Reply by Christian Linder

"You're right Brett! It's probably not the best option for the long term. But for oca…"

Christian Linder replied Jul 4, 2017 to Polythene grams/metre squared

7 Jul 7, 2017
Reply by Christian Linder

"Thank you Ian! From what I am seeing, Tyvek is a polythene cloth 125 g/metre squared…"

Christian Linder replied Jul 3, 2017 to Polythene grams/metre squared

7 Jul 7, 2017
Reply by Christian Linder

"Didn't know that.... In the shop they recommended the tack cloth... I'll be careful…"

Christian Linder replied Sep 29, 2016 to What is the best way to get rid of the dust after sanding wood and before coating?

7 Sep 29, 2016
Reply by Christian Linder

"Ok, thanks for the tips! I also found in the shop a tack cloth which is pretty effic…"

Christian Linder replied Sep 28, 2016 to What is the best way to get rid of the dust after sanding wood and before coating?

7 Sep 29, 2016
Reply by Christian Linder

"In the instructions manual they recommend allowing to cure the first coat. However,…"

Christian Linder replied Sep 23, 2016 to Primary bonding vs. secondary bonding

2 Sep 23, 2016
Reply by Christian Linder

"Thanks Budget Boater,  I don't have the compressed air... all the other steps I'm go…"

Christian Linder replied Sep 23, 2016 to What is the best way to get rid of the dust after sanding wood and before coating?

7 Sep 29, 2016
Reply by Christian Linder

"Another interesting point: I used the same mix of resin and hardener, after coating,…"

Christian Linder replied Sep 9, 2016 to Sticky Epoxy

6 Sep 12, 2016
Reply by Robert Hughes

"Hi guys! I think I didn't get the ratio right because I mixed by volume although it…"

Christian Linder replied Sep 9, 2016 to Sticky Epoxy

6 Sep 12, 2016
Reply by Robert Hughes

"Thanks Paul and Allen!  I am definitely going to glass it :-)"

Christian Linder replied Sep 8, 2016 to Boat finish.. Fibreglassing?

3 Sep 8, 2016
Reply by Christian Linder

RSS

© 2019   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service