Wharram Builders and Friends

A Photo & Discussion Forum for Wharram Design Enthusiasts

kim whitmyre's Discussions (378)

Discussions Replied To (320) Replies Latest Activity

"The manueverability of the aft engine mount is unmatched... Gave up trying to post,…"

kim whitmyre replied Sep 29, 2015 to Engine position for Tiki 26

18 Oct 4, 2015
Reply by patrick lennon

"Verrryy carefully!"

kim whitmyre replied Sep 23, 2015 to How to Lower the Main Mast on a Tiki 38?

7 Sep 30, 2015
Reply by Marc Vieux

"Éric, the dyneema is usually a bit larger diameter than the ss wire, but also usuall…"

kim whitmyre replied Sep 10, 2015 to Tiki 38 rigging

12 Sep 10, 2015
Reply by Éric Bouvéron

"On my T26, I used Dux (9mm) for the forestay, and plain dyneema for the shrouds and…"

kim whitmyre replied Sep 9, 2015 to Tiki 38 rigging

12 Sep 10, 2015
Reply by Éric Bouvéron

"Those with money to spend can use the West System Six10: http://www.westsystem.com/s…"

kim whitmyre replied Aug 16, 2015 to Empty cartidge for epoxy application

7 Aug 17, 2015
Reply by Budget Boater

"Oh dear...."

kim whitmyre replied Jun 20, 2015 to courage Pete

6 Jun 24, 2015
Reply by laurent

"Luff pocket ;-) I Z-flake as well as I can as the mainsail comes down, but the luff…"

kim whitmyre replied Jun 16, 2015 to Sail Cover for Wingsail

5 Jun 16, 2015
Reply by Ian Bamsey

"Here's a shot of mine, Ian: It could have been a bit shorter, but it does what it is…"

kim whitmyre replied Jun 16, 2015 to Sail Cover for Wingsail

5 Jun 16, 2015
Reply by Ian Bamsey

"Adriano,  the name for the hardware in the picture in english is "deadeyes." I'm usi…"

kim whitmyre replied May 22, 2015 to tiki 26 stays length

3 May 22, 2015
Reply by adriano meis

"As per Wharram plans: shrouds aft:    8.00m/26'3" shrouds front: 7.77m/25'6" Yours w…"

kim whitmyre replied May 22, 2015 to tiki 26 stays length

3 May 22, 2015
Reply by adriano meis

RSS

© 2019   Created by Budget Boater.   Powered by

Badges  |  Report an Issue  |  Terms of Service